Showing posts with label fibula pin. Show all posts
Showing posts with label fibula pin. Show all posts

Saturday, September 07, 2013

in a hurry for sushi

So much in a hurry that I just grabbed what I had including organic carrots, cucumber & pepper from the garden and cream cheese.   The simplified California roll was born.  A little this and that all came together with light soy, pickled ginger, toasted sesame, fresh mint & basil and a sauce from sour cream, hoisin sauce and sesame oil. 
A small rice cooker makes enough sushi rice for 4 rolls.  I don't like them as thick cutting them to half the thickness, spreading them out on a large plate and then a good shake of toasted sesame seeds. 
California roll lunch
2 rolls that day and then the next and yes, I smile through the morning coffee thinking about another big plate of seaweedy, sesame, fresh, creamy, layered goodness bite after bite on day two.  It is not perfect but, certainly does fill that need in a hurry!
new listing copper fibula scarf pin


Friday, February 08, 2013

On the bench- sampler of sizes and types of fibula pins

Using 12, 16 and 20 gauge wire on these ancient designs with a modern twist.  I became intrigued with ancient designs and more utilitarian pieces a few years ago and the tremendous beauty in them as well as use and function.  Amazingly just ordinary everyday wire, that we use to attach and restrain, can be bent, twisted and hammered into the most unique jewelry.
The large pin from 12 gauge wire is not to be used on tight fabric but, is wonderful to attach your loose knit scarves, shawls and sweaters embellishing them.  Next, using 16 gauge wire which here I used copper, brass and tinned copper as a trio set that are thinner and can be used on medium knit pieces. We now are getting down to the smallest in the collection  in where 18 gauge was used to make these much smaller versions.  The smaller style can be used on a tighter yet knit with some having beads to add to the aesthetic.
All of my work are work hardened by bending, hammer and tumbler to with stand years of use.  Oxidation or antiquing adds depth and can be added also to the copper and the sterling silver options.  There are some added from time to time to the shoppe but, is an option you can request for a small fee.

small fibula copper safety pins


fibulas for Jan 2013
in the round 12 fibula pins

Monday, March 12, 2012

On the Bench- Making Fibula Safety Pins

IMG_3150 by Stephanie Distler
IMG_3150, a photo by Stephanie Distler on Flickr.
Here are some of the steps involved with making fibula, swirl, safety pins from copper.

I used a 9" piece of 12 gauge copper wire this time bending the spring part first, the swirl next and then the catch. Hammering and adjusting are also involved to make that perfect pin.

This batch is going through the tumbler to provide depth, hardness and a fab shine.

Wubbers pliers, a ball pien hammer, steel block, sandpaper, steelwool and assorted files were used in this project.

Friday, September 04, 2009

On the bench- making fibula style sweater or scarf pins

Decided to forge fibula pins for the scarves and shawls coming into the gallery very soon!
These are very go with the flow type of design just need a body, spring, pin and hinge!

DSC02529
playing with different designs to see what I like...I really like the safety pin with the swirl,
I used 16 gauge for the that the others have 12 or 14 gauge.
These pins are used on loose knit material such as in scarves, shawls and sweaters. I am going to make 2 inch pins next, these are 3 and 4 inches.
DSC02527
the largest one :)

DSC02521
Here you can see the filed tip close up along with the clasp.
I file and polish each pin to take care of every little rough edge ;)


excerpt from http://www.wikipedia.com/

Fibulae were composed of four components: The body, pin, spring, and hinge.

BodyThe body of a fibula is known as either the bow or the plate, depending on the basic form. A bow is generally long and narrow, and often arched. A plate is flat and wide. Plates could be solid or openwork. The body was often decorated. The head is the end of the fibula with the spring or hinge. The foot is the end of the fibula where the pin closes. Depending on the type of fibula, and the culture in question, the head of the fibula could be worn facing up, down or to the side.

PinThe pin that is used to fasten the clothing, is either a continuation of the fibula’s body or a separate piece attached to the body. The fibula is closed by connecting the end of the pin to a catch plate, or pin rest.


SpringThe body and pin meet at either a spring or hinge. The earliest design is the spring which provides tension to the pin. The spring could be unilateral or bilateral. A unilateral spring winds around in one direction only. Unilateral springs are the earliest type, first appearing around the 14th century BC. Bilateral springs that wind around to both sides of the fibula body, appeared around the 6th century BC. Bilateral springs can be very short, with only one or two revolutions per side, or up to 10 cm long. Most bilateral springs are made of one piece of metal and therefore have a spring cord, a piece of wire extending from one end of the spring to the other. The spring cord can pass in front of or behind the fibulae body. Bilateral springs wrap around a pin or axle. These are usually made of iron even if the rest of the of the fibula and spring is copper alloy. In the 1st century AD some fibulae had springs that were concealed under a metal cover that was an extension of the fibula body. These are known as covered springs, or hidden springs.


Hinge
In the late 1st century BC or early 1st century AD a new design appeared in some bow type fibulae. A separate pin was attached to the head-end of the bow with a small hinge. In the second half of the 1st century AD, hinges were introduced to plate type fibulae. One or two small plaques were cast on the back of the plate and a pin was attached to them by a small hinge. Previously, plate type fibulae had bilateral springs attached to the back. In the 3rd century AD, the hinge was placed in the centre of a long transverse bar creating the famous Crossbow fibula design. A few fibulae from a much earlier date also had hinges, although this design feature was very rare and soon died out for nearly five centuries. For example, the Asia Minor Decorated Arc Fibula (Blinkenberg Type XII Variation 16) dating to the 5th century BC.

It is important to note that different types of fibula construction were used contemporaneously. Though the introduction of the hinge was later than the introduction of the spring, the spring remained in use long after the hinge was introduced. Therefore, a given fibula with hinge is not necessarily more recent than one with a spring.

UseFibulae were originally used to fasten clothing. They represent an improvement on the earlier straight pin which was less secure and could fall out. While the head of the earlier straight pin was often decorated, the bow or plate of the fibula provided a much increased scope for decoration. Among some cultures, different fibula designs had specific symbolic meanings. They could refer to a status or profession such as single woman, married woman, man, warrior, or chief. Some Roman-era fibulae may symbolize specific ranks or positions in the Roman legions or auxiliary. In some cultures, fibulae were worn in pairs and could be linked by a length of chain.

Printfriendly

Related Posts Plugin for WordPress, Blogger...